My Scanns
Childe of Hale Scan
3D Scanning the John Middleton Statue in Hale Today I added another piece of North West history to my growing digital archive. I scanned the John Middleton statue in Hale using the Creality Otter Lite.. and it was one of the cleanest outdoor captures I’ve done in a...
I believe in the communion of saints 3D scan
came across this incredible old carved chair inside Liverpool Cathedral and had to scan it. i did forget to take photographs of this as there was a lot of people wanting to look at it .. so going back tomorrow to get some Scanned using the Creality Otter this...
Shot at Dawn
I went out today to get this fantastic statue in a lovely little Town called Maghull it took about 4 minuets to do and never lost tracking once and zero clean up, must be a personal best haha.. i used the Otter Lite, and this shows again how fantastic this scanned...
3D scan OF the John Hulley statue
I stopped by today to scan the John Hulley statue using the Creality Otter Lite. I had it on an extender pole because of the height, and the bright sun was hitting it straight on as well. I thought it might cause problems, but the Lite handled it perfectly. It locked...
3D scan of the Christmas Truce statue
I went to St Luke’s Bombed Out Church today to scan the Christmas Truce statue, I have been after this one for a long time and the timing couldn’t have been better. The whole place has been turned into a glowing Garden of Light, with more than 2,000 illuminated steel...
The new Spirit of Liverpool Liver Bird
Scanned The new Spirit of Liverpool Liver Bird in Central Station today using the Otter Lite.. This one pushed me a bit.. the statue is smooth, reflective and the light around the wings made me think I’d lose tracking straight away.. At first it did...
A Case History” on Hope Street, Liverpool
I Scanned “A Case History” on Hope Street, Liverpool, using the Creality Otter. This is a large, complex sculpture with lots of smooth surfaces, so it’s a demanding scan. I did try the Otter Lite first, but for a piece of this scale the full Otter was simply the...
Mad Hatter Tea Party statue in Warrington
This was a Massive scan Mad Hatter Tea Party statue in Warrington.. scanned using the Creality Otter with the Scan Bridge. This one was done in pretty rough conditions. It had been raining and the stone statue was absolutely soaking wet and shiny. I genuinely...
The Peter Pan statue in Sefton Park
I drove out to scan the Peter Pan statue in Sefton Park, only to arrive and find the whole area locked behind gates. Turns out there was a wedding going on inside the Palm House. No access at all. Rather than heading home, I found security and very...
Bob Paisley statue outside Anfield Stadium
This is the Bob Paisley statue outside Anfield Stadium, scanned using the Otter Lite and printed with the K2 I tried this one before but had to stop halfway through as security weren’t too keen on what I was doing. Came back again, different day,...
Bill Shankly Statue Anfield Liverpool
Back at Anfield scanning one of the most important figures not just in Liverpool FC history..but in football history as a whole. The statue of Bill Shankly stands at just over 8ft tall (around 2.4 metres), so this was a big one. I used...
George Formby Statue Scanned with the Creality Otter
When I was in Wigan yesterday i couldn’t miss the chance to scan the George Formby statue at the Grand Arcade. The scan came out well, and it really captures his character, especially with that classic ukulele pose he was known for. George Formby was born in Wigan in...
Wigan Mining Monument
Wigan Mining Monument – Scanned with the Creality Otter I stopped by Wigan today to scan the Wigan Mining Monument, a powerful tribute to the town’s coal mining past. The full scan took around 22 minutes using the Creality Otter and wireless bridge. It came out really...
Back to Back Heroes
Back to Back Heroes 3D Scan of My Two Boys with the Creality Otter This one’s special. I scanned my two boys standing back to back, holding toy guns in a classic movie-style pose the kind of action stance you’d see on a film poster. I scanned each of them separately...
Capturing a Memory: A Personal 3D Scan of My Family
Tonight I decided to use my 3D scanner for something a little more personal. Instead of an inanimate object, I scanned my wife and kids as they relaxed on the sofa. The setup was simple: the Creality Otter, its wireless bridge, and my Galaxy Fold 7. The entire...
Unlocking a New Dimension in 3D Scanning
There’s a special kind of magic in being able to capture a real world object and bring it into the digital realm. For creators, hobbyists, and professionals alike, 3D scanning opens up a universe of possibilities. But often, the process can feel complex or time...
Dixie Dean Scan
Went out this morning to get a statue scan, i have been wanting to get for ages its of Dixie Dean a Footballing icon in Liverpool... the scan took about 10 minuets to do using the Creality Otter and The iPhone 17 pro max.. this turned out fantastic better than i...
Scan of the Wilfred Owen statue
I got a great scan of the Wilfred Owen statue in Birkenhead today., my first Statue scan since i fell scanning. The whole thing took about fifteen minutes. I kept going over it again and again, trying to capture every last fine detail. I didn't want to miss a thing,...
Sofa Son Scan
Just got a great scan of my Youngest on the sofa was a quick 2 min scan with the Otter Lite this scanner never stops amazing me, the quality and portability in one little scanner 🙂
Faceless guardians of history!
Rhuddlan, North Wales a town where history whispers from every stone. Recently, I encountered a truly remarkable landmark: a set of large, imposing wooden figures standing as silent sentinels over the town. Known as "The Knight's Sculpture," these are the faceless...
Horse Statue at Brickfield Pond, Rhyl
A Day at Brickfield Pond A Scan with a Story Recently, I visited Brickfield Pond in Rhyl, North Wales to scan a remarkable public artwork: a life-sized horse statue that stands close to the water’s edge. This sculpture, though beautiful, proved to be one of the most...
A Tribute in Bronze: The Guide Dog Statue in New Brighton
I scanned the Guide Dog Statue in New Brighton, Wirral, this took about 5 minuets to do with very little clean up at all all, scanned with the Creality Otter and Wireless bridge. Set against the scenic backdrop of New Brighton’s seafront, just outside the Floral...
The Mermaid Trail – New Brighton, Wirral
I Scanned the Mermaid Statue New Brighton, this took about 10 minutes of that to complete and it turned out fantastic.Scanned using the Creality Otter Inspired by the local legend of The Black Rock Mermaid, a mystical figure said to have appeared to a local sailor in...
Sir Ken Dodd 3D scan
Scanned at Liverpool Lime Street Train Station This is Sir Ken Dodd, who sadly passed away in 2018. He was a fantastic man who made people laugh all his life. He was a comedian and actor, born and lived in Liverpool. It was an absolute honour and pleasure to scan his...
I scanned the Bessie Braddock statue at Liverpool Lime Street
This morning at 9 AM, right in the middle of rush hour, I scanned the Bessie Braddock statue at Liverpool Lime Street. It was packed with people rushing about, but I managed to get it done in about 10 minutes. Scanned using the Creality Otter and the Wireless...
I scanned the Liverpool Heroes Memorial
Today I scanned the Liverpool Heroes Memorial in Abercromby Square, a statue that honours Captain Noel Chavasse, one of the most decorated soldiers of WWI, and other Liverpool born Victoria Cross recipients.This one really tested me. It took just under an hour to get...
scanning the Mother Redcap Statue in Wallasey
Was out today scanning the Mother Redcap Statue in Wallasey it took about 15 minutes or so to complete, the Otter scanned this without any problems and it turned out fantastic...Scanned with the Creality Otter and Wireless Bridge The Mother Redcap statue in Liscard,...
William Shakespeare and Anne Hathaway
During my weekend trip to Worcester, I had the privilege of scanning the statues of William Shakespeare and Anne Hathaway, two figures whose connection to the city is deeply embedded in history. These statues are not just artistic representations but living reminders...
Vesta Tilley
Scanning the Vesta Tilley statue in Worcester was a fascinating experience, as it allowed me to capture the essence of one of the most iconic figures in British entertainment history. Despite being located in a busy area, with traffic and crowds of people, I was able...
Sir John and Cecil Moore
Sir John and Cecil Moores Statues The Sir John and Cecil Moores Statues in Liverpool honor the founders of the Littlewoods empire, pivotal figures in the city's commercial history. These bronze sculptures, crafted by local artist Tom Murphy, were unveiled in 1996 by...
Brian Epstein Scan
Today’s Scan: Brian Epstein StatueScanning the Brian Epstein statue was a bit of a challenge due to its busy location, surrounded by traffic and people. Despite the hustle and bustle, I managed to complete the scan in about 15 minutes. It required some extra patience,...
Eleanor Rigby
I was out and about in Liverpool today and managed to get a scan of the Eleanor Rigby statue. It's based on the Beatles song "Eleanor Rigby." I scanned it with the Creality Otter using the wireless scan bridge. The Eleanor Rigby Statue in Liverpool is a poignant...
Paddington Bear scan
Went out to find the Paddington Bear Bench; it's part of the UK-wide trail, Paddington Visits. I was lucky enough that security let me scan it as they watched on. It took around two minutes in total. Anyone who has doubts about the Creality Otter and the bridge,...
Paul McCartney
The Beatles Statue is a monument in Liverpool, England, placed at the Pier Head, near the intersection of Brunswick Street and Canada Boulevard. It was designed by sculptor Andy Edwards, and unveiled on 4 December 2015. It consists of four bronze statues depicting...
Cilla Black
Cilla Black Scanned using the Otter with the Bridge, it took about 2-3 minutes to scan. It tackled this statue fantastically, even with the tiny gap at the back. The life-size bronze statue of Cilla Black on Liverpool's Mathew Street stands as a tribute to the beloved...